KAPTON FHF & KAPTON FH

Introduction :

The FHF,FH are the dry adhesive type of polyimide (Kapton © ) tapes that are made by coating F-46 ( Teflon © FEP ) emulsified solution on to polyimide film and then sintering at high temperatures. It can be melted and shaped within 30 sec. at 320 – 330C.

Applications :

It's extensively used for insulation layer of wire, cable and electromagnetic line as well the insulation for various H~C grade motors.

Technical Specifications :

Mechanical Properties          Units        Values      

Tensile Strength                          MPa                   min 110

Elongation                                   %                     min 40

Stripping Strength             g/25mm       min 600

Electrical  Properties               Units        Values

Breakdown Strength            KV/mm       min 120

Dielectric Constant at 50Hz.          2 - 3

Loss Tangent at 50 Hz.              -                     max 0.01

*(1)

ADDITIONAL DATA

Notes :
FHF Film: Double-side; FH Film: Single-side

Normal Thicknesses:   0.033,  0.035, 0.0375,  0.050, 0.060, 0.0750 mm  +  10%

F46 ( Teflon © FEP ) Double Layers, Per Thickness: 0.01mm+10%;
Standard Widths : 10mm to  500mm

Core Diamater : Standard 3" I.D.
  

 (1) All information provided by Complex Plastics Ltd. Is given in good faith and is believed   to be accurate and it is up to the end user to determine the suitability of this product for   the intended application.      

(2) The shelf life is 1 year counted from the date of delivery.

   **   Teflon ©  is the Registered Trade Name for Dupont's PTFE & FEP

  *** Kapton © is a Registered Trade Name for Dupont Polyimide Tape.